User Manual Q&AAnswer
Feb 22, 2025 - 12:24 AM
To link the Futaba R7003SB receiver to your Futaba transmitter, follow these steps:
1. Bring the transmitter and the receiver close to each other, within 20 inches (half meter).
2. Turn on the transmitter and place it into the receiver linking mode. Refer to your transmitter's operation manual for instructions on how to enter the linking mode.
3. Turn on the receiver.
4. The receiver will wait for the linking process to begin for 2 seconds. After that, it will return to normal operation mode.
5. When the LED of the receiver changes from blinking red to solid green, the linking is complete. The link waiting state ends in 1 second.
6. If you change the System Type of the transmitter, you will need to re-link the receiver to the transmitter.
Please note that if there are multiple FASSTest systems turned on in close proximity, your receiver might have difficulty establishing a link to your transmitter. To avoid any issues, it is recommended to double-check whether your receiver is properly linked to your transmitter.
Add New Comment