How do I install the Honeywell FS10-R Digital Infrared Electro-Optical Fire Detector? (Honeywell FS10-R Digital Electro-Optical Fire Detector Instruction Manual)

Answer

manuals.plus

Feb 22, 2025 - 12:23 AM


To install the Honeywell FS10-R Digital Infrared Electro-Optical Fire Detector, please follow the steps outlined in the instruction manual. Here is a summary of the installation process:

1. Ensure that the detector is installed by qualified professional personnel in accordance with local codes.

2. Determine the appropriate location for the detector. It should be placed within the detection distance ordered from the factory (e.g., 15 feet, 30 feet, or 45 feet) of the fire threat area and have a clear view of the area being monitored.

3. Mount the detector on the wall using the provided mounting hardware. Alternatively, you can use the optional SM2 swivel mounting assembly or SM4 Stainless Steel Swivel Mount.

4. Connect the detector to the power supply. Apply only 24 Volt DC regulated electrical power to the detector's electrical input power connections. Refer to the specific input power requirements mentioned in the manual.

5. Install the appropriate conduit for the detector's wiring. Ensure that the conduit is properly sealed and, if necessary, install an approved conduit trap or drain in areas where moisture may accumulate.

6. Test the detector to ensure it is operating correctly. During normal operation, the red LED should continuously blink on for about 10 seconds and then blink once every 10 seconds.

For more detailed instructions and information, please refer to the Honeywell FS10-R Digital Infrared Electro-Optical Fire Detector Instruction Manual.