User Manual Q&AAnswer
Feb 22, 2025 - 12:16 AM
To pair the MEDLINE MDS7001B Blood Pressure Monitor with Bluetooth to your device, follow these steps:
1. Turn on the blood pressure monitor by sliding the power switch on the top of the unit to the "ON" position.
2. Make sure your smart device's Bluetooth is turned on and open the Medline Health App.
3. In the app, press the menu button, then select "Devices" and "Add Device".
4. On the blood pressure monitor, press and hold the "User 2" button to start the pairing process. The symbols on the LCD screen will blink alternately to indicate pairing is in progress.
5. Once Bluetooth pairing is completed, the device ID will appear in the app. Select it, and the monitor will sync with the app.
6. The monitor will display the "Successful Pairing" icon, and the screen will go dark.
Note: The Device ID will begin with "0" or "1" followed by "MDS7001B" and 6 alternating digits of the monitor's serial number. The serial number can be found on the left side of the monitor.
If you encounter any issues during the pairing process, make sure your smart device's Bluetooth is on and in pairing mode. Also, ensure that the blood pressure monitor is within range of your smart device (usually within 33 feet or 10 meters). If the problem persists, refer to the troubleshooting section of the user manual or contact Medline customer service for further assistance.
Add New Comment