User Manual Q&AAnswer
Feb 22, 2025 - 12:12 AM
To level the printing platform on the Creality 3D LD-002R 3D Printer, follow these steps:
1. Raise the platform and loosen the fixing screws on the left and right sides of the material trough to remove the material trough.
2. Loosen the four screws on the connecting plate of the prototyping platform.
3. Attach a flat A4 paper tightly to the print screen.
4. On the touch screen, go to Settings -> Z Axis Motion -> Leveling.
5. Follow the on-screen instructions to adjust the platform until the A4 paper fits evenly with the platform.
6. Once the platform is leveled, tighten the four screws of the platform.
Note: The printing platform is usually leveled at the factory, but if it needs leveling due to transportation or other reasons, you can follow the steps above to adjust it. Make sure to use a flat A4 paper for the leveling process.
For more detailed instructions and illustrations, please refer to the user manual provided with the printer.
Add New Comment