User Manual Q&AAnswer
Feb 22, 2025 - 12:02 AM
To install the mxion G-Lights Light Systems, please follow these steps:
1. Remove any existing degree from the device.
2. Plug the LED into the socket and glue it if necessary.
3. Plug the lamp screen and stick it if necessary.
4. Make sure the LED legs do not touch each other. Optionally, you can fill the base with glue to secure the LED legs.
5. Mount the resistor on the long leg of the LED, which is now the positive pole.
Please refer to the connecting diagrams in the manual for more detailed instructions and illustrations. It is important to ensure that there are no connection errors, such as shorts or excessive loads, as this can damage the device. Avoid any short circuits caused by mounting screws or metal.
Note: If you encounter any difficulties during installation, it is recommended to contact the manufacturer's hotline or refer to their website for technical support and schematics for application examples.
Add New Comment