How do I install the SATCO 60-7652 14 inch Matte Black Bathroom Vanity Lights Wall Light? (SATCO 60-7652 Bathroom Vanity Lights Wall Light Instruction Guide)

Answer

manuals.plus

Feb 21, 2025 - 11:59 PM

To install the SATCO 60-7652 14 inch Matte Black Bathroom Vanity Lights Wall Light, please follow these steps:

1. Ensure that the electricity to the wires you are working on is shut off. This can be done by removing the fuse or shutting off the circuit breaker.
2. Carefully remove the fixture from the carton and check that all parts are included.
3. Fasten the cross bar onto the outlet box using the two outlet box screws provided.
4. Tie the ground wire from the outlet box and from the fixture to the ground xxxx on the cross bar.
5. Connect the white wire from the fixture to the white wire (neutral wire) from the supply circuit.
6. Connect the black wire from the fixture to the black wire (live wire) from the supply circuit.
7. Cover the connections using the provided wire connectors.
8. Insert the green grounding xxxx into the hole with two raised dimples on the mounting bar.
9. Wrap the ground wire from the fixture (if supplied) around the green grounding xxxx and connect it to the ground wire from the outlet box using a wire connector. If the ground wire from the fixture is not supplied, wrap the ground wire from the outlet box around the green grounding xxxx and tighten it.
10. Never connect the ground wire to black or white power supply wires.
11. Connect the fixture wires according to the color and group instructions provided in the manual.
12. Fit a wire connector over the wires and xxxx it clockwise until firm.
13. Gently try to pull the connector off the wires to ensure a secure connection.
14. Connect the fixture wire from group B to the white wire from the outlet box in the same manner.
15. Secure the fixture to the wall outlet box using the mounting screws.
16. Secure the glass to the fixture using the snuffer.
17. Install the appropriate lamps (not included) without exceeding the maximum capacity recommended on the socket.

Please note that proper wiring is essential for the safe operation of this fixture. If you are unsure about any step, it is recommended to consult a qualified electrician for assistance.