User Manual Q&AAnswer
Feb 21, 2025 - 11:57 PM
To program the Niko 05-315 Mini RF Interface for Push Buttons, you will need to refer to the user manual of the Easywave receivers. The manual provides detailed instructions on how to program the system. Here are the general steps to follow:
1. Check the battery and contacts: Ensure that the battery and the contacts make good permanent contact.
2. Check the supply voltage: Verify the supply voltage of the receiver in the distribution box.
3. Check the wiring: Make sure that everything is connected as shown on the wiring diagrams provided in the user manual of the receivers.
4. Reset and reprogram the receiver: If the system is not working after the above checks, you can try resetting and reprogramming the receiver. Refer to the user manual of the receivers for instructions on how to do this.
For existing installations, you should also check the batteries of the transmitter(s), the mains voltage (230V~) on the receiver, and the operation of the connected load. Additionally, check for any possible interference caused by changes in the system environment, such as moving metal cabinets, walls, or furniture.
If you encounter any specific issues or have further questions, it is recommended to contact Niko customer support at +32 3 778 90 80 or via email at support@niko.eu. They will be able to provide you with more personalized assistance based on your situation.
Add New Comment