User Manual Q&AAnswer
Feb 21, 2025 - 11:44 PM
To install the sink onto the base of the Moreno Bath MOA36-CG Angeles 36-Inch Cement Gray Single Sink Bathroom Vanity, follow these steps:
1. Ensure that the cabinet is securely fixed in place before proceeding with the sink installation.
2. Apply silicone glue to the underside of the sink where it will come into contact with the base of the vanity. Be sure to use a silicone sealant that is suitable for bathroom fixtures.
3. Carefully position the sink onto the base, aligning it with the pre-cut hole. Press firmly to ensure a secure bond between the sink and the base.
4. Wipe away any excess silicone sealant that may have squeezed out around the edges of the sink. Use a damp cloth to clean up the sealant, ensuring a neat and tidy appearance.
Note: It is important to allow the silicone sealant to cure according to the manufacturer's instructions before using the sink. This will ensure a proper seal and prevent any leaks or damage.
For more detailed instructions and illustrations, please refer to the installation guide provided with the Moreno Bath MOA36-CG Angeles 36-Inch Cement Gray Single Sink Bathroom Vanity.
Add New Comment