User Manual Q&AAnswer
Feb 21, 2025 - 11:34 PM
To change the brightness levels on the OLIGHT Friendship 2023 Small LED Flashlight, follow these steps:
1. When the light is first turned on, it will go to low mode as the default setting.
2. Soft press the button without fully clicking for momentary on.
3. To cycle through momentary low and high modes, quickly soft press the button, let go, and then soft press again.
4. For constant on, deep press the button until you hear a click.
5. To switch between low and high brightness levels, continue to click the button on and off within 2 seconds after the light was turned off.
6. If the light is turned on over 2 seconds after it was switched off, it will go directly to low mode as the default setting again.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment