Answer

Feb 21, 2025 - 10:44 PM
To install the nJoy CA0312GX-AZ 2U Battery Cabinet for Balder, you have two options: rack-mount installation or tower installation.
Rack-mount installation:
1. First, fix the holders of the rack on the battery pack.
2. Then, fix the battery pack on the rack through the holders.
Tower installation:
1. Place the battery pack in a suitable location.
2. Connect the battery pack with the included cable to the Balder 1000/1500 UPS following the provided installation chart.
Battery installation:
1. Before installing the batteries, make sure the battery pack is disconnected from the UPS.
2. Remove watches, rings, or other metal objects and use tools with insulated handles.
3. Wear rubber gloves and boots for safety.
4. Remove the upper and front covers of the battery pack.
5. Remove the front panel and the transparent box inside.
6. Place three batteries inside the transparent box, following the correct battery connection sequence shown in the manual.
7. Close the box and reinsert it in the designated location. Repeat the same process with the second transparent box.
8. Mount the front panel back and connect the battery cables with the unit cables, following the correct connection method shown in the manual.
9. Reassemble the upper and front covers of the battery pack.
Please refer to the user manual for detailed instructions and illustrations on the installation process.
Add New Comment