User Manual Q&AAnswer
Feb 21, 2025 - 10:26 PM
To install the lamp onto a light stand, follow these steps:
1. Loosen the stand mount locking xxxx by turning it counterclockwise.
2. Place the mount on the light stand and secure the xxxx by turning it clockwise. Make sure the light stand is fully mounted onto the support and the xxxx is securely fastened.
3. Adjust the light to the desired angle by loosening the angle adjustment and locking handle. Turn it clockwise to loosen. Move the light to the desired position and then tighten the handle by turning it clockwise.
Please refer to the "Lamp Installation" section in the user manual for visual illustrations and additional information.
Note: It is important to ensure that the lamp is securely mounted to the light stand to prevent any accidents or damage.
Add New Comment