User Manual Q&AAnswer
Feb 21, 2025 - 10:25 PM
To install and connect the mXion LSS-WSD Turnout Lantern, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Place the decoder in a protected location where it will not be exposed to moisture.
2. Make sure that the outputs are set to the appropriate value before connecting any other devices to avoid any damage.
3. Connect the lantern to the track or a DC voltage source using the provided cables.
4. Ensure that there are no short circuits caused by the mounting screws or metal.
5. Refer to the connecting diagrams in the manual for proper installation.
6. Note that the device is protected against shorts and excessive loads, but in case of a connection error such as a short, this safety feature may not work and the device could be destroyed.
Please refer to the manual for more detailed instructions and diagrams specific to your installation needs.
Add New Comment