User Manual Q&AAnswer
Feb 21, 2025 - 10:20 PM
To connect the mXion KBM Railway Barrier Module in analog mode, follow these steps:
1. Supply power to the module using a DC voltage between 7-27V or an AC voltage between 5-18V.
2. Connect the control for the barriers to the 2 contact inputs on the module. These inputs can be connected in parallel to a commercial button in the track with a reed switch or light barriers.
3. Ensure that there are no short circuits caused by the mounting screws or metal.
Please refer to the "Connecting example analog" section in the user manual for more detailed instructions and diagrams.
Note: It is important to read the manual thoroughly and follow the instructions carefully to avoid any damage to the device.
Add New Comment