User Manual Q&AAnswer
Feb 21, 2025 - 10:01 PM
To connect your Lester ELECTRICAL ChargerConnect App to your Summit Series II charger, please follow these steps:
1. Ensure that your charger is connected to a valid battery pack and that the charger is powered on.
2. Make sure that Bluetooth and location services are enabled on your mobile device.
3. Open the Charger Connect app on your device.
4. On the app's home screen, you will see a list of available chargers. If your charger's serial number is listed, tap on it to select it. If the serial number is not listed, tap the "Refresh" button to scan for available chargers again.
5. Once you have selected the charger's serial number, the app will establish a Bluetooth connection with the charger. You will see the Red, Yellow, and Green LEDs on the charger blinking simultaneously, indicating that the Bluetooth communication is active.
6. If the charger was actively charging before the Bluetooth connection was made, it will continue to charge while connected unless you stop it via the app.
7. Once the connection is established, you will be taken to the Dashboard screen, which provides an overview of the charger's settings and charging status.
Note: If you are unable to connect to the charger, make sure that your mobile device is within range of the charger and that there are no other devices interfering with the Bluetooth connection. Additionally, ensure that the charger's Bluetooth functionality is enabled and that the charger is not already connected to another device.
For more detailed information and troubleshooting tips, please refer to the Lester ELECTRICAL ChargerConnect App User Guide provided with your charger.
Add New Comment