User Manual Q&AAnswer
Feb 21, 2025 - 09:59 PM
To adjust the hangar bar length for the NICOR DLR4V5-FRAME Recessed LED Downlight System, follow these steps:
1. Carefully unpack the frame from its packaging and inspect it for any defects due to shipping.
2. If necessary, adjust the hangar bar length by separating the bars and snapping them to the desired length at the score marks.
3. Reassemble the hangar bars after adjusting the length.
4. Position the frame between the joists, ensuring that the hangar bars are in the correct position. The bottom edge of the hangar bars should be level with the bottom of the joists.
5. Starting with the swivel foot end of the hangar bar, secure the hangar bars to the joists using the captive nails provided.
6. Lift and secure the opposite side of the frame to the ceiling joist.
7. Position the frame in the desired place on the hangar bars and tighten the set xxxx to lock the frame in place.
Please note that these instructions are a summary and should be followed in conjunction with the NICOR DLR4V5-FRAME Recessed LED Downlight System Instruction Manual for complete and accurate installation guidance.
Add New Comment