User Manual Q&AAnswer
Feb 21, 2025 - 09:49 PM
To set up the DLT 400 Digi-Wave 400 Series Transceivers and Receivers, follow these steps:
1. Select a DLT Transceiver to be the Master 1. The Master 1 device will declare the majority of the settings for the Digi-Wave system.
2. Use the Menu Navigation Buttons on the device to navigate through the settings menu. The buttons include:
- Power Button: Press and hold for power On/Off. Press quickly to navigate back a step when using the menu.
- Talk Button: Used to talk or stop talking (only available on DLT 400 transceivers).
- Up and Down Buttons: Navigate through menu items.
- Menu/Select Button: Hold down for a few seconds to enter the settings menu. Press to select the highlighted option and move to the next step.
3. Start with the Basic Settings:
- Select a Mode: Choose the appropriate mode for your needs (Intercom, Tour, Hearing Assistance, Interpretation, Court).
- Select Speaking Priority: If this is the first DLT transceiver being set up, select Master 1. Other units will typically be Guest priority.
- Select the group number.
- If in Interpretation Mode, set the Broadcast Type.
- The Master 1 can choose to display the clock and select between a 24-hour or 12-hour clock format.
- If required, manually set the address. Automatic address selection is recommended unless there is a need to override the address.
4. Enter Advanced Settings if more customization is needed. Some advanced settings include:
- Number of Microphones: Limit the number of speakers at one time.
- Tone Control: Adjust the tone up or down to your preference.
- Side Tone Adjustment: Adjust the volume of the speaker's voice as heard in the headset.
- Microphone Gain and Line Gain: Increase the volume of the microphone or input sound.
- Encryption: Add extra security to the transmitted signal via encryption.
- Encryption PIN: Set a PIN for a group or channel to restrict access.
- Allow Join Group: Enable or disable automatic joining of the group.
- Save Profile: Save settings in a profile for future use.
5. Once the settings are configured, the device is ready to be used.
For more detailed instructions, including additional features and customization options, please refer to the full user manual available for download from the Digi-Wave 400 system's product page on Williams AV's website.
If you encounter any difficulties or need further assistance, you can contact Williams AV's Customer Service for support at 1-800-843-3544 (U.S.A.) or +1 952 943 2252 (Outside the U.S.A.). They can provide you with a Return Authorization Number (RA) and shipping instructions if necessary.
Add New Comment