User Manual Q&AAnswer
Feb 21, 2025 - 09:41 PM
To reset the NICOR NLCSPEW1WH-LHW NLC Wireless End-Mount PIR-Daylight Sensor to factory settings, follow these steps:
1. Make sure the lights connected to the sensor are turned off.
2. Turn on the lights for 8 seconds, and then turn off the power for 10 seconds.
3. Immediately turn the lights on and off, and then wait for another 10 seconds. Repeat this step 3 times.
4. Turn the lights on for 8 seconds, and then turn off the power for another 10 seconds. Repeat this step 2 times.
5. Finally, turn the lights back on. If the lights start blinking, it indicates a successful factory reset. All previous settings connected to the app will be deleted.
Note: It is important to wait for at least 10 seconds to ensure that the fixture is completely powered off. The waiting period may vary depending on the driver and power supply. If the driver can cut power to the fixture within 3 seconds, you may change the waiting period from 10 to 3 seconds to facilitate a faster reset time.
Please refer to the NICOR NLCSPEW1WH-LHW NLC Wireless End-Mount PIR-Daylight Sensor Instruction Manual for more details and illustrations on the reset process.
Add New Comment