User Manual Q&AAnswer
Feb 21, 2025 - 09:36 PM
To adjust the detection distance of the xpr MTT-IR Infrared Touchless Switch, you can use the DIP switch located on the device. The DIP switch for detection distance adjustment is labeled "Detection distance adjustment" and has two positions: ON and OFF.
- If the DIP switch is set to ON, the detection distance will be adjusted to 6 cm.
- If the DIP switch is set to OFF, the detection distance will be adjusted to 2 cm.
By toggling the DIP switch to the desired position, you can easily adjust the detection distance of the touchless switch according to your needs. Please refer to the user manual for visual instructions on locating and adjusting the DIP switch.
Add New Comment