User Manual Q&AAnswer
Feb 21, 2025 - 09:31 PM
To install the MIO-2375 single-board computer, follow these steps:
1. Check the packing list to ensure that all the necessary items are included in your shipment.
2. Retrieve the cooler (heatsink) and 4 x standoffs from the accessory box.
3. Remove the release paper from the thermal pads on the cooler.
4. Place the standoffs onto the designated mounting holes on the board.
5. Align the cooler with the standoffs and gently press it down to ensure proper contact with the thermal pads.
6. Make sure the cooler is securely attached to the board.
7. Connect the necessary cables, such as SATA, audio, COM, USB, AT power, and SATA power cables, to their respective connectors on the board.
8. Install the M.2 B-Key and M.2 E-Key modules, if required, into their respective slots on the board.
9. Connect any additional peripherals or devices to the appropriate connectors on the board, such as front panel, GPIO, I2C, FAN, DC power in, etc.
10. Ensure that all connections are secure and properly seated.
11. Power on the device and follow the startup manual or access the BIOS to configure the system settings as needed.
For more detailed instructions and illustrations, refer to the startup manual provided with the MIO-2375 single-board computer.
Add New Comment