User Manual Q&AAnswer
Feb 21, 2025 - 08:57 PM
To pair the Aranet NH3 Sensor Kit with the base station, you can follow the recommended method using batteries. Here are the steps:
1. Ensure that you have the Aranet transmitter (lid opened) and 1x AA battery ready.
2. Open the Sensorhub application on your computer (make sure you have the latest firmware upgrade).
3. In the application, go to the "SENSORS" section and choose the preferred measurement interval.
4. Click the "PAIR SENSOR" button on the computer screen.
5. Immediately insert the batteries into the transmitter or insert the batteries and click the "PAIRING" button on the transmitter's left corner.
6. The sensor will be paired and appear in the "SENSORS" category in the application.
7. You can now finish the sensor setup and xxxx the transmitter's lid back on.
If you encounter any difficulties during the pairing process, you can reach out to support@aranet.com for assistance.
Please note that this is just a summary of the pairing process. For more detailed instructions and information, you can refer to the Aranet NH3 Sensor Kit Instruction Manual provided by the manufacturer.
Add New Comment