User Manual Q&AAnswer
Feb 21, 2025 - 08:29 PM
Cleaning the filters of the FISHER PAYKEL HC30PCW1 Wall Range Hood is a simple process. Here's how you can do it:
1. Ensure that the range hood is turned off and unplugged from the power source.
2. Locate the three stainless steel filters on the underside of the range hood.
3. To remove the filters, push the filter release tab and lift the filters out.
4. The filters can be cleaned either in the dishwasher or by hand in hot soapy water.
5. If using a dishwasher, place the filters in the top rack and run a normal cycle. Ensure that the filters are completely dry before reinstalling them.
6. If washing by hand, soak the filters in hot soapy water and gently scrub them with a non-abrasive brush or sponge. Rinse thoroughly and allow them to air dry.
7. Once the filters are clean and dry, reinsert them back into the range hood by aligning the tabs with the slots and pushing them in until they click into place.
8. Ensure that the filters are securely installed before using the range hood again.
It is recommended to clean the filters regularly to maintain optimal performance and prevent the buildup of grease and debris. Refer to the user guide for more detailed instructions and safety precautions.
Add New Comment