How do I install the FoxESS AC Charger? (FoxESS AC Charger User Manual)

Answer

manuals.plus

Feb 21, 2025 - 08:06 PM

To install the FoxESS AC Charger, please follow the steps outlined in the manual:

1. Pre-installation preparation: Gather the necessary tools such as a cross screwdriver, special plum screwdriver, stripping pliers, and pressing pliers.

2. Installation precautions: Ensure that the charger is installed by a qualified, trained electrician. Follow all wiring requirements and access the charger correctly.

3. Installation placement environment and location: Choose a well-ventilated area away from water, combustible gas, and corrosive agents. Make sure the ground or installation platform can support the weight of the charger. If the charger is used in low temperatures, wait for it to dry completely before installation to avoid electric shock.

4. Wall-mounted installation method: Mark four holes on the wall, fit the expansion tubes, attach the mounting backplane with screws, attach the bracket to the charger, hang the charger onto the mounting backplate, and xxxx it securely.

5. Floor type/Vertical installation method: Drill holes on the cement floor, install and fix the anchor screws, run the input line through the column hole, install the backplane to the landing column with screws, attach the bracket to the charger, hang the charger onto the mounting backplate, and xxxx it securely.

For more detailed instructions and illustrations, please refer to the "Installation" section of the manual.

Note: It is important to consult a qualified electrician for proper installation to ensure safety and compliance with local wiring rules and regulations.