User Manual Q&AAnswer
Feb 21, 2025 - 08:03 PM
To bind the transmitter to the receiver, please follow these steps:
1. Keep the transmitter switch OFF and the throttle joystick at the bottom position.
2. Connect the battery to the plane and then turn on the transmitter within 5 seconds.
3. The receiver LED will flash for 3-8 seconds to bind automatically.
4. After the receiver LED stops flashing, it means the binding process is done.
After binding, follow these steps to operate a bound plane:
1. Power on the transmitter first.
2. Connect the battery to the plane within 3 seconds.
3. The receiver LED in the plane will flash and then turn solid in several seconds.
4. Switch the Top-Gyro control stick to the desired assist level (MIDD or BEGINNER).
5. Allow the airplane to stay still for about 3-5 seconds in a calm environment to calibrate and activate the Top-Gyro. When the Top-Gyro starts to react, it means it is activated.
6. Turn the throttle stick up to the maximum and then down to the minimum to arm the motor.
Note: It is important to keep the plane still during the binding process and to activate the one-key U-turn function every time you power on the plane.
Add New Comment