User Manual Q&AAnswer
Feb 21, 2025 - 07:57 AM
To install the Leonton ET2-0800 8-Port Industrial Ethernet Switch, follow these steps:
1. Unpack the switch from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the switch. If not, refer to the DIN-Rail Mounting section for installation instructions. If you want to wall mount the switch, refer to the Wall Mounting section for installation instructions.
3. Hang the switch on a DIN-Rail or wall according to the Mounting Installation section.
4. Power on the switch and check if the power LED light turns on. If you need help with wiring the power inputs, refer to the Wiring the Power Inputs section.
5. Prepare a twisted-pair, straight-through category 5 cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the switch's Ethernet port and the other side into the networking device's Ethernet port (e.g., switch, PC, or server). The Ethernet port's LED on the switch will turn on when the cable is connected to the networking device.
7. Check the LED indicators for normal operation, as described in the LED Indicators section.
8. Once all connections are set and the LED lights show normal, the installation is complete.
Note: If you encounter any issues during installation, refer to the Troubleshooting section or contact Leonton for technical support.
Add New Comment