User Manual Q&AAnswer
Feb 21, 2025 - 07:41 AM
To install YBS Insulation Airtec 2 in 1 Reflective Bubble Insulation, follow these steps:
1. Measure the area where you want to install the insulation and calculate the amount of insulation needed for your project.
2. Cut the insulation to the required length using scissors or a craft knife.
3. Staple the insulation at minimum 300mm intervals, making sure to maintain a 50mm overlap between layers.
4. Tape and seal the perimeter and overlaps using YBS Aluminium Foil Tape. This will create an airtight vapour control barrier.
It is important to note that for detailed technical information, you can visit the YBS Insulation website at www.ybsinsulation.com. Additionally, if you have any further questions or need assistance, you can contact a member of the YBS Insulation technical team at 01909 726 025 or via email at technical@ybsinsulation.com.
Add New Comment