User Manual Q&AAnswer
Feb 21, 2025 - 07:28 AM
To reset the Paul Neuhaus Q-NEVIO Satin Chrome Smart LED Ceiling Light, you can follow the steps outlined in the user guide:
1. Locate the reset button on the light fixture or the remote control. The reset button is usually a small, recessed button that may require a pin or a paperclip to press.
2. Press and hold the reset button for approximately 10 seconds until the light fixture or the remote control flashes or beeps, indicating that the reset process has started.
3. Release the reset button and wait for the light fixture or the remote control to complete the reset process. This may take a few seconds.
4. After the reset process is complete, the light fixture or the remote control should return to its default settings.
Please note that resetting the light fixture or the remote control will erase any customized settings or configurations you have made. If you have any specific settings or configurations that you want to keep, it is recommended to document them before performing the reset.
For more detailed instructions and illustrations, please refer to the "Reset" section in the user guide provided with the Paul Neuhaus Q-NEVIO Satin Chrome Smart LED Ceiling Light.
Add New Comment