User Manual Q&AAnswer
Feb 21, 2025 - 07:25 AM
To insert batteries or charge the Li-Ion battery for the Leica Lino P5 Precise Laser Projection, please follow the steps below:
1. Inserting Batteries:
a. Locate the battery compartment on the back of the device.
b. Slide the battery compartment cover downwards to open it.
c. Insert the required batteries (type AA) according to the polarity markings inside the compartment.
d. Close the battery compartment cover by sliding it upwards until it clicks into place.
2. Charging the Li-Ion Battery:
a. Connect the power supply adapter to the device's charging socket.
b. Plug the power supply adapter into a power outlet.
c. The Li-Ion battery will start charging automatically.
d. During charging, the status LED will illuminate red.
e. Once the battery is fully charged, the status LED will turn green.
f. It is recommended to charge the Li-Ion battery for at least 3 hours before first use.
Please note that the Leica Lino P5 Precise Laser Projection can also be used while connected to the power supply adapter, allowing continuous operation without relying on battery power.
For more detailed instructions and safety information, please refer to the User Manual provided with the product or visit the official Leica Geosystems website at www.leica-geosystems.com.
Add New Comment