User Manual Q&AAnswer
Feb 21, 2025 - 07:02 AM
To set up the music hall mmf-2.3 turntable, follow these steps:
1. Clear a level workspace to assemble the turntable.
2. Remove the turntable and all parts from the carton.
3. Install the drive belt for 33⅓ rpm play by looping it around the smaller diameter rim of the stepped motor pulley. For 45 rpm play, use the large diameter rim of the motor pulley.
4. Center the platter over the spindle of the sub-platter and lower it until it rests securely.
5. Place the counterweight onto the tonearm and xxxx it counterclockwise onto the back of the tonearm.
6. Remove the tonearm-locking strap and place it in a safe position.
7. Make sure the tonearm is in the tonearm rest and remove the stylus guard.
8. Balance the tonearm by lifting it and positioning it between the tonearm rest and the platter. Turn the counterweight counterclockwise or clockwise until the tonearm floats freely and parallel to the platter. Return the tonearm to the rest.
9. Set the tracking force by turning the counterweight counterclockwise until the tracking force scale turns to 20, which is equivalent to 2.0 grams.
10. Attach the anti-skating weight to the anti-skating rod and hanger.
11. Slide the dust cover onto the dust cover hinges on the back of the plinth.
12. Connect the turntable to the power supply and audio input of your receiver or amplifier.
13. Place a record on the platter, turn on the power switch, and lower the tonearm onto the record to play.
For more detailed instructions and diagrams, please refer to the music hall mmf-2.3 Series Belt Drive Turntable Instruction Manual.
Add New Comment