How do I install the NICOR DLR56 (v5) 5/6-inch White Recessed LED Downlight System? (NICOR DLR56 6-Inch Recessed LED DOWNLIGHT Instruction Manual)

Answer

manuals.plus

Feb 21, 2025 - 06:58 AM

To install the NICOR DLR56 (v5) 5/6-inch White Recessed LED Downlight System, follow these steps:

1. Ensure that the power is turned off before starting the installation.
2. Unpack the recessed frame from its packaging and inspect it for any shipping defects.
3. Adjust the hangar bar length if necessary by separating the bars, snapping them to the desired length at the score marks, and reassembling them.
4. Position the frame between the joists, making sure that the hangar bars are in the correct position. The bottom edge of the hangar bars should be level with the bottom of the joists.
5. Starting with the swivel foot end of the hangar bar, secure the hangar bars to the joists using the provided captive nails.
6. Lift and secure the opposite side of the frame to the ceiling joist.
7. Position the frame in the desired place on the hangar bars and tighten the set xxxx to lock the frame in place.
8. Connect the building power to the frame junction box. Connect the black wire to the black wire and the white wire to the white wire using the provided quick connectors. Connect the bare copper wire to the ground wire of the power source.
9. Carefully unpack the downlight from its packaging and inspect it for any shipping defects.
10. If using optional colored trim, align the trim onto the downlight and secure it by bending over the tabs.
11. Join the DLR's female quick connector to the Frame's male quick connector.
12. Align the tabs of the frame cap to the depressions on the DLR and snap the cap in place, ensuring that no wiring is pinched.
13. Squeeze the torsion springs together and install them into the torsion spring brackets inside the frame.
14. Carefully push the downlight upwards, making sure it is flush to the ceiling surface.
15. Verify that the downlight is properly installed by checking the view of the installed downlight system.

Please note that this is a general overview of the installation process. For more detailed instructions and safety information, refer to the instruction manual provided with the product.