User Manual Q&AAnswer
Feb 21, 2025 - 06:52 AM
To set up and operate the , follow these steps:
1. If needed, fasten the strap around the back of a chair or other supportive surface.
2. Connect the adapter cable to the corresponding cable at the side of the mat.
3. Plug the home adapter into an outlet.
4. Turn on the device using the corded remote control.
5. Place the remote control in the pouch at the side of the cushion when finished.
6. Remove the adapter from the outlet when not in use.
7. The device will switch off automatically after the 30-minute timer runs out.
8. Do not set up or use the massager in a bathroom or similarly wet/damp areas.
9. Only use the provided home adapter.
10. After the 30-minute timer, the massager will automatically switch off and will only allow itself to be switched on again after an appropriate downtime.
11. It is recommended to not exceed a continuous heated massage of 30 minutes to avoid straining your muscles too much.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment