User Manual Q&AAnswer
Feb 21, 2025 - 06:38 AM
To install the GLOBO LIGHTING 15809DLMDS Pendant Light, please follow the steps below:
1. Before starting the installation, make sure the power supply is turned off at the main switch.
2. Carefully unpack the pendant light and check if all the parts are included as mentioned in the instruction manual.
3. Determine the desired location for the pendant light. Ensure that the ceiling is strong enough to support the weight of the fixture.
4. Attach the mounting bracket to the ceiling using screws and anchors suitable for your ceiling type. Make sure the bracket is securely fastened.
5. Connect the wires from the ceiling to the wires of the pendant light. Follow the color coding for proper connection: connect the black wire to the black wire, the white wire to the white wire, and the green or bare copper wire to the grounding wire.
6. Use wire connectors or twist the wires together and secure them with electrical tape. Make sure the connections are tight and insulated.
7. Carefully lift the pendant light and align the mounting bracket with the fixture's canopy. Insert the screws provided and tighten them to secure the pendant light to the bracket.
8. Once the pendant light is securely attached, restore power at the main switch and test the light to ensure it is working properly.
9. Adjust the height of the pendant light, if necessary, by adjusting the length of the suspension cables or chains, following the instructions provided in the manual.
10. Finally, ensure that all the parts are properly tightened and secured before completing the installation.
For more detailed instructions and diagrams, please refer to the GLOBO LIGHTING 15809DLMDS Pendant Light Instruction Manual available on the official website at www.globo-lighting.com.
Add New Comment