User Manual Q&AAnswer
Feb 21, 2025 - 06:35 AM
To assemble the PITSCO EDUCATION Drone Maker, follow these steps:
1. Cut four body tubes to equal lengths, around 45mm.
2. Slide the propeller guards onto the motor mounts from the top.
3. Press the props onto the motor axle, matching the props labeled "A" to the red-and-blue wired motors, and the props labeled "B" to the black-and-white wired motors.
4. Align the motors with the drone body, ensuring that the motor wire coloring matches the wire coloring coming from the drone body. This is important because the motors spin in opposite directions.
5. Attach the body tubes to the drone body and motor mounts by sliding them snugly over the connection points.
6. Refer to the provided diagram for the basic drone design.
For more detailed instructions and diagrams, please refer to the PITSCO EDUCATION Drone Maker User Guide.
Add New Comment