User Manual Q&AAnswer
Feb 21, 2025 - 06:19 AM
To install the traulux SMI-W100 Motorised Wall Mount, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, ensure that the system has been installed following the manual.
2. Make sure that there is no visible damage to the product. If there is, do not proceed with the installation.
3. Ensure that there is no possibility of personal injury during motor use, such as squeezing of fingers, hands, or arms.
4. Allow free space for movement of the application in both directions to avoid blockades.
5. The motorized wall mount is designed for indoor use only within a temperature range of +10ºC to +40ºC.
6. Check the voltage of the control box before connecting the system to the mains. Make sure it is correct.
7. During operation, if the control box or the motors make unusual noise or smell, immediately switch off the mains voltage.
8. Take care to prevent cables from being damaged or pinched.
9. If you need to move the system, unplug the mains cable from the mobile equipment before doing so.
10. Do not exceed the maximum load capacity of the motors. Overloading the motors can result in damage.
11. Do not use the motors for lifting persons.
12. For maintenance, always unplug the mains cable before proceeding with any cleaning process.
13. When cleaning, use cleaners and disinfectants that are not highly alkaline or acidic (pH 6-8).
For more detailed instructions and information, please refer to the traulux SMI-W100 Motorised Wall Mount Instruction Manual provided with the product.
Note: If you encounter any difficulties during installation or have specific questions about your setup, it is recommended to contact the manufacturer or their customer support for further assistance.
Add New Comment