User Manual Q&AAnswer
Feb 21, 2025 - 06:16 AM
The HANECO DUO 350 Push Button Dimmer features a simple 2-wire design for easy installation. Here are the steps to install it:
1. Turn off the power supply to the circuit you will be working on.
2. Remove the existing switch or dimmer from the wall.
3. Connect the live wire (usually black or red) from the circuit to the "L" terminal on the DUO 350 dimmer.
4. Connect the switched live wire (usually black or red) from the circuit to the "LOAD" terminal on the DUO 350 dimmer.
5. If necessary, connect the earth wire (usually green or yellow/green) from the circuit to the "E" terminal on the DUO 350 dimmer.
6. Securely tighten the terminal screws.
7. Attach the DUO 350 dimmer to the wall using the provided screws.
8. Turn on the power supply and test the dimmer to ensure it is functioning properly.
For more detailed instructions and illustrations, please refer to the HANECO DUO 350 Push Button Dimmer Owner's Manual.
Note: It is always recommended to consult a qualified electrician if you are unsure about any electrical installations.
Add New Comment