User Manual Q&AAnswer
Feb 21, 2025 - 06:15 AM
To replace the decals on the HANECO ESODO IP65 Emergency Exit Signs, follow these steps:
1. Ensure that the power to the sign is turned off before attempting any maintenance or replacement.
2. Gently remove the existing decals from the sign. They should peel off easily without causing any damage to the sign's surface.
3. Clean the surface of the sign to remove any residue or dirt. You can use a mild detergent and water solution or a non-abrasive cleaning agent.
4. Align the new replacement decals with the designated areas on the sign. The decals should come with the product and will be supplied for replacement purposes.
5. Carefully apply the new decals onto the sign, ensuring that they are straight and properly aligned. Smooth out any air bubbles or wrinkles that may appear during the application process.
6. Once the new decals are securely in place, you can turn the power back on to activate the sign.
Please refer to the HANECO ESODO IP65 Emergency Exit Signs Owner's Manual for more detailed instructions and illustrations on how to replace the decals.
Add New Comment