User Manual Q&AAnswer
Feb 21, 2025 - 06:12 AM
To install the TUNUO Frameless Recessed-Surface Mount Medicine Cabinet, follow these steps:
1. Keep the plastic corner protectors on until installation is fully completed.
2. Take out the mirror cabinet from the wood, remove the three hanging parts, and then install it on the wall to fix the mirror cabinet.
3. Measure the distance of the mounting hole and drill holes with a suitable sized drill. Install the pendant on the wall.
4. Install the top pendant into the slot and then move the anchor to the left and right.
5. Install the mirror cabinet on the pendant fixed on the wall, making sure that the pendant at the bottom is installed into the card slot.
6. Finally, determine the position of the pendant on the top, make a hole in the wall, and xxxx it in.
Please refer to the TUNUO Frameless Recessed-Surface Mount Medicine Cabinet Installation Guide for more detailed instructions and illustrations.
Note: It is important to ensure that the wall where the product is being installed can support the weight of the cabinet. Also, make sure to power off the main electrical supply before starting the installation.
For power connection, the mirror comes with a 5 ft power cable that can be directly plugged into a switch for convenient use. Alternatively, it can be hardwired by cutting off the plug and controlling the ON/OFF of power via a wall switch. However, removing the plug connector will invalidate the product warranty.
Please follow the provided power connection instructions and consult a professional electrician if needed.
For any additional questions or concerns, please refer to the or contact the manufacturer for further assistance.
Add New Comment