User Manual Q&AAnswer
Feb 21, 2025 - 06:11 AM
To properly use the Teleflex AW-06832-N Spring Wire, please follow the instructions below:
1. Before using the spring wire, make sure to read all package insert warnings, precautions, and instructions provided. Failure to do so may result in severe patient injury or death.
2. The spring wire is designed for medical procedures and should only be used by trained healthcare professionals.
3. Ensure that the spring wire is in good condition and free from any damage or defects before use. If any issues are found, do not use the wire and contact Teleflex for assistance.
4. The spring wire is marked with the following specifications: 0.032" (0.81 mm) diameter x 26-3/4" (68 cm) length. It has a straight soft tip on one end and a "J" tip on the other.
5. The wire is equipped with an Arrow Advancer with ECG mark. This feature helps with advancing the wire during procedures.
6. The spring wire is non-pyrogenic and does not contain natural rubber latex.
7. When using the spring wire, follow standard aseptic techniques to minimize the risk of infection.
8. Ensure that the wire is properly inserted and positioned according to the specific procedure being performed. Refer to the appropriate medical guidelines and consult with a healthcare professional for guidance.
9. After use, dispose of the spring wire according to the proper medical waste disposal guidelines.
For more information or specific instructions, please refer to the Teleflex AW-06832-N Spring Wire User Guide provided with the product or visit the Teleflex website at www.teleflex.com.
Add New Comment