User Manual Q&AAnswer
Feb 21, 2025 - 06:03 AM
To properly set up and use the Gasmate DH203 Portable Diesel Heater, follow these steps:
1. Ensure the heater is placed in a well-ventilated outdoor area away from any flammable materials.
2. Make sure the heater is on a level, stable, non-flammable surface.
3. Connect the 12V DC connection cable to a 12V power source with at least 15A capacity.
4. Fill the 4.25L diesel tank with diesel fuel that meets the requirements of the Fuel Standard (Automotive Diesel) Determination 2019. Do not use biodiesel fuel.
5. Set the recommended clearances from combustible materials: front 200mm, rear 200mm, sides 200mm, and above 200mm. Ensure the exhaust outlet is directed away from any objects within 1000mm.
6. If using the heater in high altitude areas above 1500m, activate the high altitude mode via the controller.
7. To start the heater, press and hold the POWER button for 2 seconds. The heater will go through its start-up process and initiate combustion.
8. Adjust the heat level by pressing the UP or DOWN buttons. There are 6 heat levels available.
9. To stop the heater, press and hold the POWER button for 2 seconds. The heater will go through its shut-down process and cool down for around 5 minutes.
10. Do not interrupt the start-up or shut-down process by cutting power to the heater.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment