How do I install the FISHER PAYKEL RD2474 Door Panel for Integrated Triple Zone Refrigerator or Freezer? (FISHER & PAYKEL RD2474 Door Panel Refrigerator User Guide)

Answer

manuals.plus

Feb 21, 2025 - 05:59 AM

To install the FISHER PAYKEL RD2474 Door Panel for Integrated Triple Zone Refrigerator or Freezer, please follow the steps below:

1. Ensure that the refrigerator or freezer is properly installed and leveled before beginning the door panel installation.

2. Start by removing any existing door panels, if applicable, by following the instructions in the user manual for your specific model.

3. Place the new stainless steel door panel in front of the refrigerator or freezer door, aligning it with the hinge side of the appliance.

4. If you have a right-hinged appliance, position the door panel accordingly. If you have a left-hinged appliance, you may need to reverse the panel or consult the user manual for specific instructions.

5. Once the door panel is aligned, use the provided screws to attach it to the appliance. Refer to the user manual for the recommended xxxx locations and tightening instructions.

6. After securing the door panel, ensure that it is properly aligned and level with the adjacent panels or cabinetry. Make any necessary adjustments to achieve a seamless fit.

7. If desired, you can now proceed to install a handle of your choice and a toe kick accessory to complete the overall look of your integrated refrigerator or freezer. Refer to the user manual for instructions on handle and toe kick installation.

For any additional assistance or clarification, we recommend contacting Fisher & Paykel's Customer Care Centre at 1.888.936.7872. They will be able to provide you with further guidance and support based on your specific model and installation requirements.