Answer

Feb 21, 2025 - 05:47 AM
To pair the AVIOT TE-D01v True Wireless Earbuds with your device, please follow these steps:
1. Turn on Bluetooth on your connected device.
2. Turn on the earphones.
3. If the earphones are not automatically paired, try pairing them manually by following these steps:
a. With the earphones on, press and hold the earphones on the right side until you hear a sound effect.
b. If you want to enable ANC mode, please press and hold after the voice guidance.
c. Release your finger immediately after the sound effect.
d. Try pairing again with your device.
If you are still experiencing issues with pairing, you can try the reset method as described below:
Reset Method:
1. Delete the Bluetooth setting of the connected device.
2. Place both earbuds in the charging case and hold the physical button behind the case for 10 seconds with the case open.
3. Once the reset is complete, the LED on the case and the earphones will blink white twice to enter pairing mode.
4. Press and hold the touch sensor on the left side for 1.5 seconds to activate the ambient microphone mode.
5. Place the headphones in the charging case, make sure the orange LED is on, and then press the physical button on the back of the case twice.
6. After the battery indicator flashes, remove the earphones from the case, and they will go into pairing mode.
Remember to turn on the earphones and ensure the orange light is on before closing the case. The earphones will automatically switch off after 5 minutes of inactivity.
Please refer to the AVIOT TE-D01v True Wireless Earbuds user manual for more detailed instructions and troubleshooting tips.
Add New Comment