User Manual Q&AAnswer
Feb 21, 2025 - 05:45 AM
To set up and configure the Herelink Blue Air Unit, follow these steps:
1. Pairing the Air Unit:
- Open the Datalink Settings App on the Herelink Blue RC control and radio system.
- Slide down the notification drawer from the top of the screen and select "Union Robotics Settings."
- Tap the "Pair" button and hold the "Pair/Reset" button on the Air Unit until LED2 blinks.
2. Radio and System Status:
- In the Datalink Settings App, you can check the radio and system status to ensure proper communication and functionality.
3. RC Calibration:
- Calibrate the RC by following the instructions provided in the manual. This will ensure accurate control inputs.
4. RC Mode and Throttle Settings:
- Set the RC mode and throttle settings according to your preference and requirements.
5. HW Wheel Calibration and Channel Settings:
- Calibrate the hardware wheel and set the channel for precise control.
6. Radio Regional Settings:
- Configure the radio regional settings to comply with local regulations and frequencies.
7. Sbus Button Configuration:
- Customize the Sbus buttons to assign specific functions or actions.
For more detailed instructions and information, refer to the IR-LOCK HLBA-1001 Herelink Blue Air Unit User Manual provided with the product.
Add New Comment