User Manual Q&AAnswer
Feb 21, 2025 - 05:21 AM
To set up and program the MI-HEAT WT8 WiFi Smart Thermostat using the TuyaSmart app, follow these steps:
1. Download and install the TuyaSmart app from the respective app store on your smartphone. Make sure your smartphone meets the minimum requirements (iOS9 or newer, Android 4.1 or newer).
2. Open the TuyaSmart app and agree to the privacy policy to continue.
3. Select your country and enter your email address. Tap on "Retrieve verification code" to receive the verification code via email. Alternatively, you can request the code via SMS by tapping on "Phone" above.
4. Enter the verification code received by email or SMS in the app.
5. Set a password for your Tuya user account and tap "Finish" to complete the account setup.
6. Tap on "Add device" to integrate the thermostat into the app.
7. In the device selection screen, tap on "Small household appliance" on the left and then select "Thermostat Wi-Fi" on the right. Make sure not to select Bluetooth, Zigbee, or BLE+Wi-Fi options.
8. Select the Wi-Fi network (SSID) of your existing router and enter the corresponding Wi-Fi password.
9. Put the thermostat into teach-in mode by switching it off and pressing the Eco button (button 3) for approximately 5 seconds until the Wi-Fi symbol appears on the display.
10. Tap on "Next step" in the app and then tap on "Next" to start the device search.
11. Once the app finds the thermostat, you can assign a name to it. After assigning a name, tap on "Completion" to successfully complete the integration.
12. The main view of the thermostat in the app will display the setpoint temperature in the center and the current room temperature (Indoor Temp) above it. You can adjust the setpoint temperature using the plus/minus keys.
13. The "Lock" button can be used to switch the key lock on/off. For the functions of the other buttons, refer to the manual (buttons 13, 14, 15, 18).
14. By tapping the "Mode" icon at the bottom left of the main view, you can change the operating mode of the thermostat (Home/Away/Smart/Sleep).
15. The thermostat can be switched off or on by tapping the "switch" symbol at the bottom of the main view.
16. By tapping on the "cogwheel" symbol at the bottom right of the main view, you can access various settings, including the sensor mode, temperature calibration, hysteresis, and the weekly program.
17. To access further settings and integration options for voice control systems like Amazon Alexa and Google Assistant, tap on the "pen" symbol in the top right-hand corner of the main view.
Please note that these instructions are a general guide, and it's always recommended to refer to the MI-HEAT WT8 WiFi Smart Thermostat user manual for detailed instructions specific to your device.
Add New Comment