User Manual Q&AAnswer
Feb 21, 2025 - 05:19 AM
To assemble the , you will need a Phillips head screwdriver. Here are the step-by-step instructions:
1. Assemble the two base halves: Position the base half with the alignment pin over the other base half with the alignment sockets. Press the two halves together until they are flush.
2. Assemble the base to the tower: With the tower on its side, align the 4 base sockets onto the tower bottom pins. Note that one of the 4 pins is "D" shaped to allow it to fit only one way. With the base in position, secure the base bottom to the tower with the 4 Phillips screws provided. Tighten the screws securely, but do not over tighten.
3. Placement near a wall or corner: Please position the tower at least 6 inches away from walls or other large surfaces. This will ensure that the tower circulator has adequate room to intake air and provide optimum performance.
4. Directing the airflow: The VORNADO 143 Whole Room Air Circulator Tower creates a wide span of airflow called V-Flow™ Circulation. The Vornado logo indicates the center point of the V-Flow™ airstream and can be used as a reference point for positioning the product in the room.
Please refer to the owner's manual for visual illustrations of the assembly process and additional information.
Add New Comment