User Manual Q&AAnswer
Feb 21, 2025 - 05:07 AM
To mount the POWER ACOUSTIK Spectrum Analyzer in your car, you have two options:
1. Double Sided Adhesive:
- Clean the surface area where you want to mount the Spectrum Analyzer using a damp microfiber towel and mild detergent if needed.
- Remove the protective paper from one side of the included double-sided adhesive.
- Apply the exposed adhesive side to the back of the Spectrum Analyzer.
- Remove the protective paper from the opposite side of the double-sided adhesive.
- Firmly press the Spectrum Analyzer onto the desired mounting surface.
2. Angled Stand / Support Bracket:
- Secure the angled support bracket to a flat surface using the provided course thread screws or apply the double-sided adhesive to the bottom of the bracket.
- If using the double-sided adhesive, remove the protective paper from the opposite side of the adhesive and firmly press the bracket onto the desired mounting surface.
- Secure the Spectrum Analyzer to the angled support bracket using the provided fine thread screws into the back of the Spectrum Analyzer.
Please refer to the POWER ACOUSTIK Spectrum Analyzer Owner's Manual for visual illustrations and additional information on mounting options.
Note: Ensure that the chosen mounting location does not obstruct your view or interfere with the safe operation of your vehicle.
Add New Comment