Answer

Feb 21, 2025 - 05:00 AM
To properly attach the Miller AirCore Tower Climbing Harness to the Bos'n chair, follow these steps:
1. Lay the harness on a flat surface with the back side facing up.
2. Place the Bos'n chair on the harness just below the belt and back pad, with the webbing straps facing up and the mating buckle connectors extending toward their corresponding connections on the harness.
3. Connect the mating buckle component on the Bos'n chair with its corresponding mating buckle component on the belt. Repeat for the opposite side.
4. Attach each adjustment strap clip on the Bos'n chair with its corresponding clip connection on the harness.
5. Ensure that the webbing straps are not twisted and that the buckles and clips are securely and properly connected.
6. The Bos'n chair can be adjusted up or down by the user while wearing the harness. Simply grasp the free end of the adjustment webbing strap and pull downward to bring the Bos'n chair up, or extend the webbing out of the clip (shortening the free end) to lower the Bos'n chair.
Please refer to the provided manual for visual illustrations and additional information on the proper use and attachment of the Miller AirCore Tower Climbing Harness and Bos'n chair.
Add New Comment