User Manual Q&AAnswer
Feb 21, 2025 - 04:58 AM
To assign the remote control to your Paul Neuhaus E0040017-03 Radio Remote Control, follow these steps:
1. Make sure the light is switched off using the wall switch.
2. Press and hold the ON button for the respective group on the remote control.
3. Switch on the light using the wall switch.
4. Within 3 seconds, the light will blink twice.
5. Release the ON button of the respective group on the remote control.
6. The light is now assigned to this group and can be controlled using the remote control.
Note: A remote control can control an unlimited number of lights, but a light can only be operated by four remote controls.
If you want to control a single group of lights, press the ON button of the respective group on the remote control. This group of lights can now be controlled by the remote control.
To control all groups of lights, press the ALL ON button on the remote control. All the lights will be controlled by the remote control.
If you want to remove a light from a remote control, follow these steps:
1. Switch off the light using the wall switch.
2. Press and hold the ON button for the respective group on the remote control.
3. Switch on the light using the wall switch.
4. Within 3 seconds, the light will blink twice.
5. Release the ON button of the respective group on the remote control.
6. The light is now no longer assigned to this group.
For additional functions, you can use the Upper Button to increase the brightness of the light, the Lower Button to reduce the brightness, the Left Button to reduce the color temperature, and the Right Button to increase the color temperature. Pressing the buttons for a short time will adjust the light in steps, while pressing them for a longer time will adjust the light continuously.
Please refer to the provided manual for more technical data and specifications of the Paul Neuhaus E0040017-03 Radio Remote Control.
Add New Comment