How do I install the onnline CHQ793 Bathroom luminaire Spa 600? (onnline CHQ793 Bathroom luminaire Spa 600 Instruction Manual)

Answer

manuals.plus

Feb 21, 2025 - 04:56 AM


To install the onnline CHQ793 Bathroom luminaire Spa 600, please follow these steps:

1. Before starting the installation, ensure that the mains connecting cable is de-energized by turning off the fuse.

2. The luminaire should be installed with a suitable distribution box, such as the OPAL IP55 CGF713 EAN 6438056236786 or ABB AP9PP IP65 EAN 6418677309809.

3. Identify the location where you want to mount the luminaire. It can be mounted on a cabinet or mirror.

4. Connect the luminaire to the electrical supply. If the luminaire has a protection class 1 symbol, connect the yellow/green protective earth wire to the protective earth terminal. If it has a protection class 2 symbol, no protective conductor is necessary.

5. Ensure that the minimum distance between the illuminant and any flammable surface is maintained as indicated by the symbol.

6. Do not make any changes to the luminaire or its connecting cable.

7. Before operating the luminaire, check for any visible signs of damage on the luminaire or its connecting cable. Do not operate it if there are any signs of damage.

8. When cleaning the luminaire, make sure it is turned off. Avoid allowing moisture into connecting areas or on current-carrying parts, as this can cause damage. Cleaning agents can also cause staining.

Please note that these instructions are a general guide. It is recommended to consult the onnline CHQ793 Bathroom luminaire Spa 600 Instruction Manual for specific installation instructions and safety precautions.