User Manual Q&AAnswer
Feb 21, 2025 - 04:49 AM
To assemble the Progress Lighting P500357-31M Saffert - 3 Light Pendant, follow these steps:
1. Start by installing the chain holder (EE) onto the xxxx (FF). Loosely thread the hex nuts (AA) onto the xxxx (FF) and then thread this assembly onto the mounting strap (CC). Install this assembly to the outlet box using the mounting screws supplied with the outlet box (not included).
2. Adjust the depth of the chain holder in relation to the canopy depth.
3. Pass the cup (H), flat washer (F), and lock washer (E) onto the stem (J) and use the hex coupling (D) to secure it tightly to the stem (J). Pass the wires from the socket assembly (N) up through the stem (J). Thread the socket assembly (N) onto the stem (J) and secure it tightly. Hook the shaped end of the rods (K) into the holes in the frame (L), then pass the threaded end of the rods (K) into the holes in the cup (H). Use the hex nuts (G) to secure the rods (K) tightly to the cup (H). Pass the wires through the cover (C), beaded nut (B), and chain loop (A). Attach the cover (C) onto the cup (H) using the beaded nut (B) and chain loop (A) to secure it tightly.
4. Raise the fabric shade (P) up into the fixture (N). Align the 3 holes in the fabric shade top plate with the 3 threaded holes on the top of the socket cluster (N). Use the 3 knurled ball studs (M) to secure the fabric shade (P) to the fixture tightly. Ensure the vertical seam on the shade is in alignment with one of the rods (K). The elongated slots in the socket assembly plate (N) allow for this adjustment.
5. Thread the lamps (not included) into the fixture sockets. Use a maximum of 60-watt incandescent medium base lamp, SBCFL, or SBLED.
6. Thread the beaded end of the stem (Q) onto the hex coupling at the bottom of the socket assembly (N). Thread a hex nut (R) onto the stem (Q). Pass one flat washer (S), one rubber washer (T), the glass diffuser (U), one rubber washer (T), and flat washer (R) onto the stem (Q). Secure the above parts onto the stem (Q) using a hex nut (R). Adjust the top and bottom hex nuts (R) as needed to make sure the glass diffuser is level with the frame (L). Thread the decorative finial xxxx (V) onto the stem (Q) tightly in place.
7. Determine the hanging length of your fixture by removing chain links (GG) and optionally cutting the electrical and ground wire to length. Do not cut electrical or ground wires until the overall length is determined. Leave at least 6 inches minimum of wire past the chain holder (EE) to allow for easy connections in step 8.
8. Open a chain link at one end of the chain (GG). Hook the open chain link (GG) onto the chain loop (A). Close the chain link back together with pliers. Pass the xxxx collar (DD) and canopy (HH) over the chain. Hook the other end of the chain (GG) onto the chain holder (EE) using the quick-link (JJ). Weave the wires through every third chain link (GG). Continue to pass the wires through the xxxx collar (DD) and canopy (HH). Pass the wire up through the chain holder (EE) and into the junction box.
9. Strip 3/8" of insulation from the electrical wire ends. Using wire nuts (BB), connect the ribbed fixture wire to the white supply wire from the outlet box and connect the smooth fixture wire to the black supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground xxxx on the mounting strap. Push all wire connections into the outlet box.
10. Tuck the wires into the junction box and slip the canopy (HH) over the chain holder (EE). Thread the xxxx collar (DD) onto the chain holder (EE) to secure the canopy tightly to the ceiling.
Please refer to the provided instruction manual for additional details and diagrams.
Add New Comment