How do I reverse the door swing on my Midea MDRT113FGF01 SERIES REFRIGERATOR Top Freezer? (Midea MDRT113FGF01 Refrigerator User Manual)

Answer

manuals.plus

Feb 21, 2025 - 04:47 AM

To reverse the door swing on your Midea MDRT113FGF01 SERIES REFRIGERATOR Top Freezer, you will need the following tools: Phillips style screwdriver, Flat blated screwdriver, and Hexagonal spanner. It is recommended to contact a qualified technician for this task, but if you believe you are qualified to do it yourself, you can follow these steps:

1. Ensure the unit is unplugged and empty.
2. Adjust the two leveling feet to their highest position.
3. Tilt the unit backwards and rest it on something solid to prevent slipping.
4. Remove the bottom bracket by unscrewing the two screws and remove the foot from the opposite side.
5. Slide the door down away from the hinge pin located on the top of the door.
6. Remove the plastic cover from the door hinge and unscrew the two screws from the top bracket.
7. Install the bracket on the other side of the appliance by screwing the two screws through the bracket and into the top of the appliance.
8. Slide the door back onto the top hinge and ensure it is face up.
9. Replace the plastic cover on the top bracket by pressing down until it clicks into position.
10. xxxx the bottom hinge into place on the new side and replace the foot on the other side.
11. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge.
12. Readjust the leveling feet.

Please note that the actual configuration may vary depending on the physical product or statement by the distributor. It is always recommended to consult the user manual or contact a qualified technician for assistance.