User Manual Q&AAnswer
Feb 21, 2025 - 04:40 AM
To install the LUMASCAPE LS3040 Ceiling Wall Light, please follow these steps:
1. Ensure that the installation complies with local electrical rules and regulations.
2. All electrical work must be performed by a licensed electrician.
3. Make sure to read and follow all safety instructions provided in the manual.
4. The luminaire should only be used with a protective shield. If the protective shield is cracked, immediately stop using the luminaire and contact Lumascape for a replacement.
5. If the external flexible cable or cord of the luminaire is damaged, it should be replaced exclusively by Lumascape or their service agent to avoid hazards.
6. The light source contained in the luminaire should only be replaced by Lumascape or their service agent.
7. Position the luminaire in a way that prolonged staring into the operating light source is not expected at a distance closer than 23 feet (7 meters).
8. Ensure that the mains input power is surge protected.
9. Never make or break connections while the circuit is energized.
10. Do not make modifications or alter the product.
11. Keep the luminaire clean and free of debris. Clean it only with warm water; do not use chemicals or abrasives.
12. Connections should be kept clean and dry at all times.
13. The luminaire is suitable for use indoors or outdoors.
Please refer to the included drawings and dimensions for specific installation details. It is recommended to use the provided tools and installation kit for proper installation. Optional accessories and glare control accessories are available if needed. Make sure to recycle the aluminum trim according to local government guidelines.
For more information and detailed instructions, you can visit lumascape.com or refer to the LUMASCAPE LS3040 Ceiling Wall Light Instruction Manual.
Add New Comment